Mini MINI (F55/F57)의 엔진 예열 시스템 09.2013 -
Mini MINI (F55/F57)의 엔진 예열 시스템
- 표준 카탈로그
- 새 카탈로그(4개 제품)
Power:
Dimensions:
Lenght:
모든 필터
Power consumption:
Connector diameter:
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
품목 코드:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
232257.37-12%203265.75 krw -
-
232257.37 - 할인된 가격
- 203265.75 krw
-
- 절감액 28991.61 krw (-12%)
-
- 매장 내
- 3 개
-
배송 날짜:
29.04.2024, 09:15
- 장바구니에 담기
더 읽기
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
품목 코드:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
43251.48-13%37544.58 krw -
-
43251.48 - 할인된 가격
- 37544.58 krw
-
- 절감액 5706.89 krw (-13%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
더 읽기 |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
품목 코드:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
55299.37 krw
- 가격: 55299.37 krw
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
더 읽기
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
품목 코드:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
204607.68-12%180334.94 krw -
-
204607.68 - 할인된 가격
- 180334.94 krw
-
- 절감액 24272.73 krw (-12%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
더 읽기
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
품목 코드:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
219973.54-14%189182.84 krw -
-
219973.54 - 할인된 가격
- 189182.84 krw
-
- 절감액 30790.69 krw (-14%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | 모든 특성 |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
더 읽기 |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
품목 코드:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
229794.70-12%201112.76 krw -
-
229794.70 - 할인된 가격
- 201112.76 krw
-
- 절감액 28681.94 krw (-12%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
더 읽기
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
품목 코드:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
231770.74-12%204519.20 krw -
-
231770.74 - 할인된 가격
- 204519.20 krw
-
- 절감액 27251.53 krw (-12%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | 모든 특성 |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
더 읽기 |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
품목 코드:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
243066.55 krw
- 가격: 243066.55 krw
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
더 읽기
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
품목 코드:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
277720.83-5.9%261322.72 krw -
-
277720.83 - 할인된 가격
- 261322.72 krw
-
- 절감액 16398.10 krw (-5.9%)
-
- 주문 가능
- 5 개
-
배송 날짜:
03.05.2024, 11:55
- 장바구니에 담기
더 읽기
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
케이블 세트, 내부 난방 벤틸레이터 (엔진 예열 시스템) DEFA 460803
품목 코드:
AL22971649
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
116998.73-34%77065.20 krw -
-
116998.73 - 할인된 가격
- 77065.20 krw
-
- 절감액 39933.52 krw (-34%)
-
- 주문 가능
- 1 개
-
배송 날짜:
29.04.2024, 13:55
- 새 카탈로그로
새 카탈로그 에서 품목 정보 보기
케이블 세트, 엔진 예열 시스템 DEFA 460785
품목 코드:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
115848.50 krw
- 가격: 115848.50 krw
-
- 주문 가능
- 2 개
-
배송 날짜:
02.05.2024, 15:55
- 새 카탈로그로
새 카탈로그 에서 품목 정보 보기
케이블 세트, 엔진 예열 시스템 DEFA 460785
품목 코드:
AL22971655
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
163184.76 krw
- 가격: 163184.76 krw
-
- 주문 가능
- 2 개
-
배송 날짜:
29.04.2024, 13:55
- 새 카탈로그로
새 카탈로그 에서 품목 정보 보기
ENGINE HEATER TT-THERMO 1500KLD
품목 코드:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
173271.37 krw
- 가격: 173271.37 krw
- 공급업체 재고: 사용할 수 없음
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | 모든 특성 |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
더 읽기 |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Mini MINI (F55/F57)의 모든 부품
- 할인 제품
- 플라스틱 내부 펜더 -45%
- 실, 배기 매니폴드NEW! -45%
- 차폭등NEW! -43%
- 과급 공기 호스NEW! -43%
- 실링, 오일 배출 (충전기)NEW! -43%
- 센서, 엑셀 페달 위치 조정NEW! -42%
- 실링 링, 냉매 파이프 호스NEW! -42%
- 밸브 가이드NEW! -42%
- 베어링 부시, 스태빌라이저NEW! -41%
- 냉각수 파이프 라인NEW! -41%
- 엔진 예열 시스템 -34%
- 피스톤, 브레이크 캘리퍼NEW! -39%
- 회전 암 -39%
- 환기 밸브, 연료 컨테이너NEW! -39%
- 환기 그릴, 범퍼 -38%
- 스포일러 -38%
- 확장, 흙받이 -38%
- 프레임, 라디에이터 그릴 -38%
- 트림, 후미등NEW! -38%
- 공기 필터NEW! -38%
- 차체 부품
- 범퍼 -35%
- 흙받이 -37%
- 플라스틱 내부 펜더 -45%
- 환기 그릴, 범퍼 -38%
- 그릴 -31%
- Rear wheel archNEW!
- 본넷 -28%
- 견인 후크
- 프론트 패널NEW! -36%
- 셔터, 범퍼
- 범퍼 강화
- 스포일러 -38%
- 셔터, 전조등NEW!
- 확장, 흙받이 -38%
- 트림-/보호 스트립, 도어NEW!
- 프레임, 안개등
- Under engine and gearbox cover (steel)
- 프레임, 라디에이터 그릴 -38%
- 마운트, 잭NEW!
- Head lamp seat -37%
- 번호판 홀더NEW! -37%
- 스포일러 -36%
- 플라스틱
- 프레임, 하향등NEW! -36%
- 삭제함NEW!
- 트림, 후미등NEW! -38%
- Number plate base
- 보호 필름
- 제동 시스템
- 브레이크 슈NEW! -23%
- 브레이크 디스크NEW! -25%
- 수리 키트, 브레이크 캘리퍼NEW! -37%
- 브레이크 캘리퍼NEW!
- 주차 브레이크 케이블NEW! -34%
- 가이드 슬리브 세트, 브레이크 캘리퍼NEW!
- 브레이크 뷰트NEW! -34%
- 액세서리 세트, 디스크 브레이크 라이닝
- 메인 브레이크 실린더NEW!
- 브레이크등 스위치NEW!
- 피스톤, 브레이크 캘리퍼NEW! -39%
- 웨어 인디케이터NEW!
- 수리 키트, 자동 조정NEW!
- 홀더, 브레이크 캘리퍼NEW! -34%
- 브레이크 부스터NEW!
- 조정 요소, 주차 브레이크 브레이크 캘리퍼NEW! -34%
- 스크류, 브레이크 캘리퍼NEW!
- 스퀄음 방지 호일, 브레이크 패드(뒤판)NEW!
- 와이어 로프 호이스트, 기어 브레이크NEW!
- 스크류 세트, 브레이크 디스크NEW!
- 스티어링 부품
- 회전 암 -39%
- 스태빌라이저 레버/-서포트NEW!
- 타이 로드 헤드NEW!
- 볼 조인트NEW! -33%
- 베어링 부시, 위시본NEW! -37%
- 베어링 부시, 스태빌라이저NEW! -41%
- 타이 로드NEW!
- 스티어링 기어NEW!
- 벨로우즈, 스티어링NEW! -34%
- 스태빌라이저, 섀시NEW!
- 수리 키트, 휠 서스펜션NEW!
- 벨로우즈 세트, 스티어링NEW! -35%
- 베어링, 완충 장치NEW!
- 수리 키트, 스태빌라이저 구리 바NEW!
- 핸들바 세트, 휠 서스펜션NEW!
- 로드/서포트, 휠 서스펜션NEW! -34%
- 스티어링 로드NEW!
- 베어링 설치, 축 빔NEW!
- 실링 캡, 팽창 탱크-파워 스티어링NEW!
- 비활성화 모듈, 전자식 댐퍼 제어NEW!
- 전기 부품
- 점화 플러그NEW!
- ABS 센서NEW! -33%
- 프랭크 샤프트 위치 센서 -35%
- 연료 펌프NEW! -28%
- 점화 코일NEW!
- 센서, 냉매 온도NEW!
- 발전기NEW! -28%
- 람다 센서NEW! -31%
- 스타터NEW! -25%
- 글로우 플러그 -36%
- 센서, 주차 보조 장치 -30%
- 센서, 오일 압력NEW!
- 충전 압력 센서NEW! -33%
- 공기량 측정기NEW! -30%
- 브레이크등 스위치NEW!
- 센서, 흡기 온도NEW!
- 센서, 외부 온도NEW!
- 노크 센서NEW!
- 센서, 배기 압력NEW! -29%
- 센서, 배기가스 온도NEW! -34%
- 다기능 릴레이NEW!
- 센서, 엑셀 페달 위치 조정NEW! -42%
- 안테나NEW!
- 센서, 오일 온도NEW!
- 센서, 제논등 (헤드라이트 범위 조정)NEW!
- 고압력 펌프NEW! -20%
- 케이블 정비 키트, 예열 플러그NEW!
- 워셔액 튜브, 윈드스크린 세척NEW!
- 센서, 내부온도NEW! -35%
- 압력 센서, 브레이크 부스터NEW!
- 센서, 대기 질NEW! -32%
- 수리 키트, 케이블 세트NEW!
- 밸브, 2차 공기-흡입 시스템NEW!
- RPM Sensor, engine managementNEW!
- 글로우 플러그, 전자식 보조 히터NEW!
- 공기량 측정기NEW!
- 스위치, 브레이크 구동 (엔진 컨트롤)NEW!
- 안테나 헤드NEW!
- 케이블 수리 키트, 센서-주차 보조NEW! -34%
- 레인센서NEW! -32%
- 충전 케이블, 전기 자동차NEW! -16%
- 홀더, 센서-주차 보조NEW!
- 센서, 오일 온도/-압력NEW! -34%
- Battery booster/Jump starter
- Battery testers & chargers
- Electrical appliances
- 기동기 보조 케이블
- 배터리 충전 장치
- 센서/스위치(발생기)
- 스타트 배터리 -49%
- 안전
- 인버터
- 품목, 플러그 하우징
- 열 관련 부품
- 온도 조절장치NEW! -34%
- 엔진 라디에이터 -32%
- 워터펌프NEW! -31%
- 내부 팬NEW!
- 컨덴서, 에어컨 -32%
- 냉각 잠금 장치NEW!
- 라디에이터 튜브NEW! -35%
- 팽창 탱크 -35%
- 저항, 내부 팬NEW!
- 에어컨 컴프레서NEW! -27%
- 라디에이터 환풍기 -17%
- 난방NEW! -34%
- 인터쿨러 -24%
- 냉매 플랜지NEW! -35%
- 셔터, 오일 필러 파이프NEW! -36%
- 오일 라디에이터NEW! -25%
- 냉각수 파이프 라인NEW! -41%
- 온도 조절장치 하우징NEW!
- 자석 클러치, 에어컨 컴프레서NEW!
- 압력 조정기, 에어컨NEW!
- 실, 온도조절장치NEW!
- 팽창 밸브NEW! -31%
- 개스킷, AGR 밸브NEW! -38%
- 실, 냉매 플랜지NEW! -36%
- 서리 방지NEW!
- 필터 세트, 내부 공기NEW!
- 실링 링, 냉매 파이프 호스NEW! -42%
- 조정 요소, 믹스 플랩NEW! -30%
- 물 순환 펌프, 보조 난방NEW!
- 컨트롤 유닛, 에어컨NEW!
- 셔터플러그, 냉매 튜브NEW! -38%
- 케이블 정비 키트, 냉매 온도 센서NEW!
- 결합-/분리 부품, 파이프 라인NEW!
- 냉각 모듈NEW!
- 실 키트, 워터 펌프NEW!
- Air conditioning bearing
- Oring set
- R134a
- 엔진
- 셔터스크류, 오일 탱크NEW!
- 실, 실린더 헤드 커버NEW! -38%
- 실, 실린더 헤드NEW! -34%
- 샤프트 실링, 프랭크 샤프트NEW! -36%
- 실 키트, 실린더 헤드NEW! -34%
- 타이밍 체인 세트NEW!
- 실린더 헤드 스크류 세트NEW! -34%
- 실, 흡기 매니폴드NEW! -36%
- 실, 배기 매니폴드NEW! -45%
- 과급 공기 호스NEW! -43%
- 실 키트, 실린더 헤드 커버NEW! -35%
- 피스톤 링 세트NEW! -34%
- 실, 오일탱크NEW!
- 벨트 풀리, 크랭크 샤프트NEW! -29%
- 실 키트, 밸브 축NEW! -35%
- 배기 플랩NEW!
- 조립 키트, 충전기NEW! -34%
- 커넥팅 로드 베어링NEW! -38%
- 유입 밸브NEW! -15%
- 호스, 크랭크케이스 브리더NEW!
- 실 키트, 크랭크 하우스NEW! -25%
- 흡입 튜브, 공기 필터NEW!
- 밸브 태핏NEW!
- SumpNEW! -31%
- 실린더 헤드 커버NEW! -30%
- 조정 밸브, 캠샤프트 조정NEW!
- 타이밍 체인NEW!
- 실 전체 키트, 엔진NEW!
- 실링, 밸브 축NEW! -36%
- 실, 오일 필터 하우징NEW!
- 밸브 가이드NEW! -42%
- 압력 변환기, 배기 컨트롤NEW!
- 센서, 엔진오일 수위NEW! -34%
- 텐셔너, 타이밍 체인NEW!
- 실, 흡기 매니폴드 하우징NEW! -36%
- 실, 오일 벤틸레이터NEW!
- 실, 온도조절장치NEW!
- 핑거 팔로워, 엔진 타이밍NEW! -36%
- 실 키트, 오일 라디에이터NEW! -36%
- 캠샤프트NEW! -29%
- 캠샤프트 조정기NEW! -29%
- 샤프트 실링, 캠샤프트NEW!
- 실, 오일 주입구 실링NEW!
- 라디에이터, EGRNEW!
- 커넥팅 로드 베어링 세트NEW! -31%
- 체인, 오일 펌프 드라이브NEW!
- 슬라이드 레일, 타이밍 체인NEW!
- 로커 암, 엔진 타이밍NEW!
- 크랭크 샤프트 베어링 세트NEW! -33%
- 피스톤NEW! -31%
- Shaft Seal, crankshaft, camshaft, Seal RingNEW!
- 파이프 라인NEW!
- 코어 어셈블리, 충전 장치NEW!
- 실린더 헤드 스크류NEW!
- 캠 샤프트 세트NEW!
- 하우징, 오일 필터NEW!
- 오일 압력 밸브NEW!
- 텐셔너 가이드, 타이밍 체인NEW!
- 실링 링, 엔진오일 수위 센서NEW! -36%
- 샤프트 실링, 캠샤프트NEW!
- 실링, 컴프레서NEW!
- 중앙 자석, 캠샤프트 조정NEW!
- 로커 암 세트, 엔진 제어NEW!
- 홀더, 분사 밸브NEW! -36%
- 실링 링, 실린더 라이너NEW!
- 실링, 터빈 유입 (충전기)NEW!
- 실링, 컴프레서NEW!
- 샤프트 실링, 오일 펌프NEW!
- 개스킷, 타이밍 벨트 텐셔너NEW!
- 오일 노즐, 컨트롤 체인NEW!
- 실링 링, 타이밍 체인 텐셔너NEW!
- 엔진, 변속기 및 구동계 마운팅
- 자동차 내부 장비
- 윈도우 레귤레이터
- 흡기부 부품
- 조립 키트, 충전기NEW! -34%
- 충전기, 충전 -19%
- 스로틀 밸브 플러그NEW!
- 실링 링, 과급 공기 호스NEW! -31%
- 호스, 급기NEW!
- 흡입 튜브 모듈NEW!
- 부스트 압력NEW! -37%
- 실, 충전기NEW!
- 밸브, 흡기-공기 컨트롤NEW!
- 오일 튜브, 충전기NEW! -35%
- 코어 어셈블리, 충전 장치NEW!
- 조립 페이스트, 디젤 주입기/예열 플러그NEW!
- 실링, 스로틀 밸브 플러그NEW!
- 입자 센서NEW!
- 조정 밸브, 컴프레서NEW!
- Sensor, differential pressureNEW!
- 리테이닝 클램프, 공기 충전 호스NEW!
- 스크류, 충전기 고정NEW!
- 배기 시스템
- 미들 머플러NEW!
- 실, 배기 파이프NEW! -36%
- 고무타이어, 배기 시스템NEW!
- 교체 촉매NEW! -20%
- 클램프 부품, 배기 시스템NEW! -36%
- 조립 키트, 충전기NEW! -34%
- 실링, 배기 파이프NEW!
- 홀더, AGR 밸브NEW! -35%
- 개스킷, 라인 AGR 밸브NEW!
- 코어 어셈블리, 충전 장치NEW!
- 실링, 오일 배출 (충전기)NEW! -43%
- 압력 변환기, 배기 컨트롤NEW!
- 밸브, AGR 배기 컨트롤NEW!
- Nox 센서, 요소 분사NEW! -30%
- 전환 밸브, 배기 플랩NEW!
- 스크류, 배기 매니폴드NEW! -36%
- 밸브, 배기 재순환NEW!
- 액세서리
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Covers for car documents
- Electronic parking clock
- Fefrigerators and cooling boxes
- First aid kit
- Flashlights, lamps
- Indicators
- Inner tubes
- Interior freshener
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system -22%
- Parking clock
- Pets
- Rudder cover
- Stickers and car identification
- Tape
- Tint films for car
- Vacuum Cleaners
- Warn jacket
- Warning triangle
- Winches
- Wipes
- 견인선
- 니 조인트 바 홀더, 연결기
- 디캘
- 라이터
- 루프 박스
- 멀티미터
- 물통
- 반사경
- 방송
- 보호경
- 삽
- 성에제거기
- 소화기
- 송풍기
- 스펀지
- 액세서리
- 열쇠 고리 세트
- 절연 벨트
- 지붕 위 짐칸
- 차량-세척 브러쉬
- 캐니스터
- 회전 비이컨
- 유니버설 베어링
- 화학 및 화장품 관리 제품
- 연관 상품
- 난방 시스템
- 엔진 예열 시스템
- Mini의 엔진 예열 시스템