Car heating warm-up system for BMW X4 (G02) 03.2018 -
Car heating warm-up system for BMW X4 (G02)
- Standard catalogue
- New catalog (4 products)
Power:
Dimensions:
Lenght:
All filters
Power consumption:
Connector diameter:
4 products more in new catalogue
NB! 4 more products found in the new catalog
Results found: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Item code:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
230335.87-12%201584.10 krw -
-
230335.87 - Price with discount
- 201584.10 krw
-
- You save 28751.76 krw (-12%)
-
- in the store
- 3 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Item code:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
42893.65-13%37233.97 krw -
-
42893.65 - Price with discount
- 37233.97 krw
-
- You save 5659.68 krw (-13%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
READ MORE |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Item code:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
54841.87 krw
- Price: 54841.87 krw
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Item code:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
202914.93-12%178843.01 krw -
-
202914.93 - Price with discount
- 178843.01 krw
-
- You save 24071.92 krw (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Item code:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
218153.66-14%187617.71 krw -
-
218153.66 - Price with discount
- 187617.71 krw
-
- You save 30535.95 krw (-14%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | ALL PROPERTIES |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Item code:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
227893.58-12%199448.93 krw -
-
227893.58 - Price with discount
- 199448.93 krw
-
- You save 28444.65 krw (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Item code:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
229853.26-12%202827.19 krw -
-
229853.26 - Price with discount
- 202827.19 krw
-
- You save 27026.07 krw (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | ALL PROPERTIES |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Item code:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
241055.63 krw
- Price: 241055.63 krw
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Item code:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
275423.20-5.9%259160.76 krw -
-
275423.20 - Price with discount
- 259160.76 krw
-
- You save 16262.44 krw (-5.9%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
22.05.2024, 18:00
- Add to cart
READ MORE
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Cable Set, interior heating fan, (engine preheating system) DEFA 460803
Item code:
AL22971649
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
116030.78-34%76427.63 krw -
-
116030.78 - Price with discount
- 76427.63 krw
-
- You save 39603.14 krw (-34%)
-
- can be ordered
- 1 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
114890.07 krw
- Price: 114890.07 krw
-
- can be ordered
- 2 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL22971655
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
161834.71 krw
- Price: 161834.71 krw
-
- can be ordered
- 2 pcs
-
date of dispatch:
22.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
ENGINE HEATER TT-THERMO 1500KLD
Item code:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
171837.87 krw
- Price: 171837.87 krw
- in suppliers stock: NOT AVAILABLE
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | ALL PROPERTIES |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Heating systems for BMW X4 (G02)
All parts for BMW X4 (G02)
- Body parts
- Bumper
- Under engine cover
- Wing
- Bumper grill
- Grill
- Sill
- Bumper bracket
- Rear wheel archNEW!
- Bonnet
- Tow hook
- Front panel
- Bumper moulding
- Bumper reinforcement
- Front bumper spoilerNEW!
- Under bumper cover
- Fender moulding
- Headlamp frame
- Under gearbox cover
- Fog lamp frame
- Grill frame
- Jack Support PlateNEW!
- Head lamp seat
- Foot BoardNEW!
- Bottom protection
- Air Inlet
- Radiator bracket
- Spoiler
- Trailer HitchNEW!
- Illustrative cover
- Front panel upper moulding
- Mounting Kit, bumperNEW!
- Upper front panel
- Seal for body parts
- Muffler tip
- Rear window louver
- Number plate base
- Protective foil
- Tuning parts
- Mirrors and connected parts
- Braking systems
- Brake padsNEW!
- Brake discNEW!
- Repair Kit, brake caliperNEW!
- Brake CaliperNEW!
- Guide Sleeve Kit, brake caliperNEW!
- Brake HoseNEW!
- Repair kit, brake padsNEW!
- Brake shoes repair kitNEW!
- Brake Light SwitchNEW!
- Wear indicatorNEW!
- Piston, brake caliperNEW!
- Repair Kit, automatic adjustmentNEW!
- Repair Kit, expanderNEW!
- Control Element, parking brake caliperNEW!
- Bolt, brake caliperNEW!
- Anti-Squeal Foil, brake pad (back plate)NEW!
- Wear indicator
- Screw Set, brake discNEW!
- Electrical parts
- Spark PlugNEW!
- Abs sensorNEW!
- Ignition coilNEW!
- Crankshaft position sensorNEW!
- Sender Unit, coolant temperatureNEW!
- AlternatorNEW!
- Lambda sensorsNEW!
- StarterNEW!
- Medalion (version USA)
- Parking sensor
- Air flow sensorNEW!
- Boost pressure sensorNEW!
- Brake Light SwitchNEW!
- Sender Unit, intake air temperatureNEW!
- Sensor, exterior temperatureNEW!
- Sensor, exhaust pressureNEW!
- Knock SensorNEW!
- Sensor, exhaust gas temperatureNEW!
- Sensor, Xenon light (headlight range adjustment)NEW!
- Sensor, accelerator pedal positionNEW!
- Cable Repair Set, glow plugNEW!
- High pressure pumpNEW!
- Electric Kit, towbarNEW!
- Water Pump, window cleaningNEW!
- Switch, park brake actuationNEW!
- Repair Set, harnessNEW!
- Glow Plug, auxiliary heaterNEW!
- Air Flow SensorNEW!
- Cable Repair Set, parking assistant sensorNEW!
- Rain SensorNEW!
- Sender Unit, oil temperature / pressureNEW!
- Assortment, plug housings
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Car battery
- Electrical appliances
- Fuses set
- Inverter
- Jumper cables
- Sender Units/ Sensors
- Thermical parts
- ThermostatNEW!
- Radiator
- Water PumpNEW!
- AC condenser
- Radiator capNEW!
- Radiator HoseNEW!
- Expansion tank
- AC compressorNEW!
- Intercooler
- Thermostat bracketNEW!
- Oil cap
- Oil coolerNEW!
- Thermostat HousingNEW!
- Control Valve, coolantNEW!
- Magnetic Clutch, air conditioner compressorNEW!
- Pressure Switch, air conditioningNEW!
- Gasket, thermostatNEW!
- Expansion valveNEW!
- Seal, EGR valveNEW!
- Gasket, thermostat housingNEW!
- Gasket, water pumpNEW!
- Driven Plate, magnetic clutch compressorNEW!
- AntifreezeNEW!
- High Pressure Line, air conditioningNEW!
- Seal Ring, coolant tubeNEW!
- Water Pump, parking heaterNEW!
- Cable Repair Set, coolant temperature sensorNEW!
- Plug, coolant flangeNEW!
- Connector, pipesNEW!
- Gasket, heater flap boxNEW!
- High-/Low Pressure Line, air conditioningNEW!
- Gasket Set, water pumpNEW!
- Repair Kit, water pumpNEW!
- Cooler ModuleNEW!
- Air conditioning bearing
- Oring set
- R134a
- Engine
- Oil Drain Plug, oil panNEW!
- Gasket, cylinder head coverNEW!
- Gasket, cylinder headNEW!
- Shaft Seal, crankshaft, Shaft Seal, camshaftNEW!
- Gasket Set, cylinder headNEW!
- Bolt Kit, cylinder headNEW!
- Timing Chain KitNEW!
- Gasket, intake manifoldNEW!
- Gasket Set, cylinder head coverNEW!
- Gasket, exhaust manifoldNEW!
- Charger Intake HoseNEW!
- Piston Ring KitNEW!
- Gasket, wet sumpNEW!
- Belt Pulley, crankshaftNEW!
- Seal Set, valve stemNEW!
- Mounting Kit, chargerNEW!
- Exhaust ValveNEW!
- Big End BearingsNEW!
- Hose, crankcase breatherNEW!
- Inlet ValveNEW!
- Charger, charging system
- Gasket Set, crank caseNEW!
- Rocker/ TappetNEW!
- Cylinder Head CoverNEW!
- Sump
- Control Valve, camshaft adjustmentNEW!
- Full Gasket Set, engineNEW!
- Seal, oil filter housingNEW!
- Seal, valve stemNEW!
- Pressure Converter, exhaust controlNEW!
- Valve GuidesNEW!
- Timing ChainNEW!
- Oil level sensorNEW!
- Gasket, intake manifold housingNEW!
- Tensioner, timing chainNEW!
- Gasket, thermostatNEW!
- Finger Follower, engine timingNEW!
- Gasket Set, oil coolerNEW!
- Hose, cylinder head cover breatherNEW!
- Camshaft AdjusterNEW!
- CamshaftNEW!
- Seal, oil filler capNEW!
- Shaft Seal, camshaftNEW!
- Cooler, exhaust gas recirculationNEW!
- Conrod Bearing SetNEW!
- Chain, oil pump driveNEW!
- Rocker Arm, engine timingNEW!
- Guides, timing chainNEW!
- Crankshaft Bearing SetNEW!
- Shaft Seal, crankshaft, camshaft, Seal RingNEW!
- PistonNEW!
- Cylinder Head BoltNEW!
- Intake Manifold, air supplyNEW!
- Housing, oil filterNEW!
- Camshaft KitNEW!
- Oil Pressure ValveNEW!
- Tensioner Guide, timing chainNEW!
- Seal, engine oil level sensorNEW!
- Seal, compressorNEW!
- Shaft Seal, camshaftNEW!
- Central Magnet, camshaft adjustmentNEW!
- Rocker Arm Set, engine timingNEW!
- Holder, injectorNEW!
- Seal Ring, O-Ring, cylinder linerNEW!
- Seal, turbine inlet (charger)NEW!
- Seal, chargerNEW!
- Shaft Seal, oil pumpNEW!
- Centering Bush, propshaftNEW!
- Oil pan (gearbox)
- Oil Jet, timing chainNEW!
- Drive system parts
- Wheel bearing kitNEW!
- CV-jointNEW!
- CV-joint bootNEW!
- Axle shaftNEW!
- Shaft Seal, differentialNEW!
- Seal, drive shaftNEW!
- Bearing, propshaft centre bearingNEW!
- Shaft Seal, manual transmissionNEW!
- Drive ShaftNEW!
- Bearing, drive shaftNEW!
- Oil, all-wheel-drive couplingNEW!
- Universal JointNEW!
- Holder, propshaft centre bearingNEW!
- Engine, transsmision and drive system mountings
- Windscreen wiper systems
- Car interior equipment
- Air intake system parts
- Mounting Kit, chargerNEW!
- Throttle bodyNEW!
- Seal, turbo air hoseNEW!
- Intake Manifold ModuleNEW!
- Gasket, chargerNEW!
- Control Valve, air intakeNEW!
- Boost Pressure Control ValveNEW!
- Oil Pipe, chargerNEW!
- Air filter housing
- Assembly Paste, diesel injector / glow plugNEW!
- Seal, throttle bodyNEW!
- Sensor, differential pressureNEW!
- Particle SensorNEW!
- Holding Clamp, charger air hoseNEW!
- Hollow Screw, chargerNEW!
- Fuel system
- Hose, fuel overflowNEW!
- Seal Ring, nozzle holderNEW!
- Breather Valve, fuel tankNEW!
- Gasket, fuel pumpNEW!
- Accelerator Pump, carburettorNEW!
- Fuel LineNEW!
- Plunger, high pressure pumpNEW!
- Seal, injector holderNEW!
- Holder, fuel filterNEW!
- Distributor Pipe, fuelNEW!
- Seal Ring, injector shaftNEW!
- Charcoal Filter ValveNEW!
- Fuel Hose
- Exhaust System
- Gasket, exhaust pipeNEW!
- Rubber Strip, exhaust systemNEW!
- Catalytic ConverterNEW!
- Clamp, exhaust systemNEW!
- Mounting Kit, chargerNEW!
- Seal, exhaust pipeNEW!
- Bracket, EGR valveNEW!
- Gasket, EGR valve pipeNEW!
- Seal, oil outlet (charger)NEW!
- Pressure Converter, exhaust controlNEW!
- Holder, exhaust pipeNEW!
- NOx Sensor, urea injectionNEW!
- Dosing Module, urea injectionNEW!
- Sealing ring, injection valve (urea injection)NEW!
- Fuel system parts
- Fuel cap
- EGR ValveNEW!
- Diesel InjectorNEW!
- Sensor, fuel pressureNEW!
- Knock SensorNEW!
- Throttle bodyNEW!
- Seal Ring, nozzle holderNEW!
- Pressure Converter, exhaust controlNEW!
- Seal Ring, injectorNEW!
- Sensor, exhaust gas temperatureNEW!
- Sensor, accelerator pedal positionNEW!
- Pressure Control Valve, common rail systemNEW!
- Heat Shield, injection systemNEW!
- Air Pressure Sensor, height adaptationNEW!
- Transmission
- Other 2
- Other
- Gasket / SealNEW!
- Holding BracketNEW!
- Wedge Unit, drum brakeNEW!
- NOx Sensor, NOx CatalystNEW!
- Engine OilNEW!
- Locking ClipNEW!
- Slack AdjusterNEW!
- Cap, tank unit (urea injection)NEW!
- Actuator, injector pumpNEW!
- Automatic Transmission OilNEW!
- Automatic Transmission OilNEW!
- Central Valve, camshaft adjustmentNEW!
- Transfer Case OilNEW!
- Air/Electric Horn
- Battery Post Clamp
- Carry Case
- Cover, battery post clamp
- Earth Cable, distributor
- Hand Feed Pump
- Miscellaneous
- Vehicle combination paint
- Auto chemicals
- Universal bearings
- Chemistry and cosmetic care products
- Accessories
- Accessories
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Car flags
- Car seat covers
- Children's goods
- Cigarette Lighter
- Clamps and ties
- Covers for car documents
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system
- Parking clock
- Petrol can
- Pets
- Radio
- Reflective plate
- Roof Box
- Roof Rack
- Rotating Beacon
- Rudder cover
- Safety Goggles
- Spade
- Sponge
- Sticker
- Stickers and car identification
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Water Can
- Winches
- Wipes
- You may also like
- Heating systems
- Car heating warm-up system
- Car heating warm-up system for BMW